W-301101 Wilson Trucker Mirror Mount Cellular Antenna:
The Wilson Trucker Cellular Antenna works great on Semi Trucks, homes and just about anywhere you need a dual-band antenna and don't have the metal surface required to use a magnetic mount antenna. The trucker is very popular for home use when the Yagi is more than you need - you just mount the trucker at the edge of the roof with the W-901104 mount.
The Wilson Trucker Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilsons innovative design results in high efficiency with low losses and will get the most signal to your cellular phone. Thanks to these innovations and our attention to detail Wilson Electronics has the best performing trucker cellular antenna available.
Usage
Specifications:
Part Number 301101
Frequency Range 806-894MHz, 1850-1990MHz
Impedance 50 Ohms
Antenna Gain 5.12dBi (806-894MHz), 6.12dBi (1850-1990MHz)
System Gain 10 - 15dB
Radiation Omni
Polarization Vertical
Wavelength 0.9 (806-894MHz), 1.95 (1850-1990MHz)
Ground Plane Built-In Ground Plane
Connector FME Female
Coax Cable 12` RG-58
Height 32.625"
Mount Standard CB 3/8" * 24 Thread
Compatibility: All car kits that are equipped with antenna FME attachment. You may also connect directly to your phone via a Direct Connect Adapter. Check our listing for Adapter compatibility. Adaptor sold seperately. Please check if your phone or carkit has a direct connector with FME male/female connector before purchasing this unit.
When used without a repeater, or amplifier a phone adapter for your specific phone is required. |
